Crown Point Bridge
Currently we are producing the bridge rail and pedestrian rail for the Crown Point Bridge connecting New York to Vermont. This bridge, when finished, will span over two thousand feet of Lake Champlain. The bridge is scheduled for completion in August of 2011.
2 Rail Bridge Rail
The bridge rail itself will be a standard 2 rail system. The only deviation from the standard rail specifications will be caps on all of the bridge posts.
This hand rail will consist of T-Beam posts holding a wire mesh fence system. Then attached to the posts will be a run of 1 1/2" diameter hand rail that will contain light fixtures to light up the bridge at night.
The picture is of the old bridge from wikipedia.com
Overhead Sign Structures On New York State Thruway
Currently we are producing multiple overhead sign structures for multiple locations in multiple counties along the New York State Thruway between Herkimer and Rochester. The structures are being produced for Powerline Constructors.
Span Sign Structures
For this job we are producing three different span sign structures that when complete will span all lanes of traffic.
Angle Butterfly Cantilever Structures
For this job we are producing four different angle butterfly cantilever structures. Each structure consists of a butterfly box design made entirely of angles and a single post. When the structures are installed they will also have a LED traffic sign, stairs, and a catwalk for sign maintenance.
The picture to the right was provided to us by our sister company Hermosa Corporation. The structure shown can be seen on the NYS Thruway near Syracuse, NY.